Shut-off Valves

Home » Products » Shut-off Valves
­

Don’t see what you’re looking for? Give us a call at 1-800-662-5356.

  • Febco 622FT Ball Valves PictureFebco 622FT Ball Valves Cover

    Febco 622FT Ball Valve

    CALL US 800-66-BKFLO
    Series LF622FT Lead Free* Full Port Tapped Ball Valves are designed for steam service applications. They are ideal for throttling and balancing of nonabrasive fluids where minimum flow is 20% to 100% of valve capacity. The full port design ensures minimal pressure drop. These valves feature a PTFE stem packing seal, thrust washer and seat. They are available with tapped outlets suitable for the installation of a pressure gauge or test cock. Maximum Working Pressure: 600psi (41.3 bar) WOG; 125psi (8.6 bar) WSP.

    Features:

    • Stainless Steel Ball
    • Lead Free
    • Bronze Body

    Available Sizes:

    1/2", 3/4",1", 1 1/4", 1 1/2", 2"
  • Wilkins 850 Ball Valve PictureWilkins 850 Ball Valve Cover

    Wilkins 850 Ball Valve

    CALL US 800-66-BKFLO
    Available both ways Wilkins: #1 Ball Valve Tapped union ball valve (lead free) and Wilkins: #2 Ball Valve NOT apped union ball valve (lead free).

    Features:

    • Quarter turn, full port ball valves
    • Bronze body construction
    • Hard chromed brass ball
    • Used on Wilkins small diameter backflow assemblies

    Available Sizes:

    1/2", 3/4",1", 1 1/4", 1 1/2", 2"
  • Watts Model 600 Check ValveWatts Series 600,601,601s, 600-23 MAXI FLO Check Valves

    Watts 600, 601, 601S

    CALL US 800-66-BKFLO
    Series 600 check valves will efficiently perform all of the functions of a swing check or vertical lift check valve, and at the same time operate silently to prevent the effects of water hammer. These valves are not suggested for installation in sewage ejector piping.

    Features:

    Series 600

    • Maximum pressure/temperatures: 15 psi ( 1 bar) WSP @ 250° F (121°C), 400 psi (27.6 bars) WOG non-shock @ -20° F (-29° C) to 100° F (38° C).
    • Conical brass disc for full fluid flow.
    • PTFE seat.
    • Install in horizontal or vertical position. (Consult factory for proper use in vertical installations)
    • Low pressure drop equivalent to a swing check.
    • Stainless steel guide rod and spring. (I-1/4" - 2")
    • Silent operation.
    • Threaded Ends.
    • Sizes: 1/4" - 2" (8 - 50mm)

    Series 601

    • Similar to No. 600, except with Viton disc and integral brass seat.
    • Max pressure/temperature: 400 psi (27.6 bars) WOG (non-shock) @ 100° F (38° C)
    • Threaded Ends.
    • Sizes: 1/4", 3/8", 1/2" (8, 10,15mm)

    Series 601s

    • Same as No. 601 Series, except with solder ends.
    • Sizes: 1/2", 3/4", 1" (15, 20, 25mm)

    Series 600-Z3

    • Similar to 600 Series
    • Heavier internal construction for better stem guidance and longevity.
    • Conical 316SS disc for full fluid flow.
    • Larger diameter stainless steel guide bushing.
    • Maximum pressure/temperatures: 150 psi (10.3 bars) WSP @ 366° F (186° C), 400 psi (27.6 bars) WOG non-shock @ -20" F (-29° C) to 100°F (38° C)
    • Request ES-600-Z3 spec sheet for dimensions and performance characteristics.
    • Sizes 3/4", 1-1/2"

    Available Sizes: Series 600

    1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

    Series 601s

    1/2", 3/4", 1"  
  • Watts Series 408 OSYRW Flanged Gate ValvesWatts Series 408 OSYRW Flanged Gate Valves

    Watts 408OSYRW

    CALL US 800-66-BKFLO
    Series 4080SYRW: Resilient wedge disc design offers positive seating and resistance against high differential pressure. Valve is best suited for service in either the fully open or closed position, but is also suitable as a throttling valve. Recommended for fire main shutoff and distribution service.

    Features:

    • ASTM A126 Class B Cast lron
    • Full port flow, low head loss
    • Fusion bonded coating, internal and external
    • Encapsulated resilient wedge
    • Easy in-line service
    • Replaceable disc
    • Boss-tapped and plugged
    • MSS-SP-70 conformance
    • 250psi CWP, non-shock
    • Maximum Temperature: 140°F

    Available Sizes:

    2 1/2", 3", 4", 6", 8", 10", 12"
  • Watts G-4000 & G-4000-FDA Bronze Ball ValvesWatts G-4000 & G-4000-FDA Bronze Ball Valves

    Watts G-4000 & G-4000-FDA

    CALL US 800-66-BKFLO
    Series G-4000 features a full port, cast iron construction with stainless steel ball & stem. G-4000-FDA is the same except it has an electro-statically applied heat fused epoxy coating (interior & exterior).

    Features:

    • Same end-to-end dimensions as conventional flanged iron gate valves
    • Fast quarter-turn open or closed operation
    • Stainless steel ball and stem
    • Positive shut-off
    • Two-piece body construction

    Available Sizes:

    2", 2 1/4", 3", 4", 6", 8", 10"
  • Watts Series FBV-FBV1 Bronze Ball ValvesWatts Series FBV-FBV1 Bronze Ball Valves

    Watts FBV

    CALL US 800-66-BKFLO

    Features:

    • Suitable for full range of liquids and gases.
    • Minimal pressure drop due to full size ports.
    • Bottom loaded, pressure retaining stem.
    • Pressure rated at 600 psi WOG (non- shock) @ 100°F m"-2", and 125 psi saturated steam.
    • Suitable for temperatures from 0°F to +350°F Valves at 50 psi.
    • Virgin PTFE stem packing seal, thrust washer and seat.
    • Vinyl insulator on heavy duty zinc-plated, carbon steel handles.
    • Fast quarter-turn open or close operation.
    • Excellent for throttling and balancing applications, of non-abrasive fluids where minimum flow is: 20% to 100% of valve capacity.
    • Low operating torque.
    • Adjustable stem packing gland.
    • Each valve individually tested, in the opened and closed position.

    Available Sizes:

    1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
  • Watts Series 406NRSRW Flanged Gate ValvesWatts Series 406NRSRW Flanged Gate Valves

    Watts 406NRSRW

    CALL US 800-66-BKFLO
    Series 406NRSRW: Resilient wedge disc design offers positive seating and resistance against high differential pressure. Valve is best suited for service in either the fully open or closed position, but is also suitable as a throttling valve. Recommended for irrigation, potable water, water distribution service, feed lines, and sewage disposal facilities.

    Features:

    • ASTM A126 Class B Cast lron
    • Full port flow, low head loss
    • Fusion bonded coating, internal & external
    • Vulcanized, encapsulated resilient wedge
    • Easy in-line service
    • Replaceable disc
    • Boss-tapped and plugged
    • MSS-SP-70 conformance
    • 200psi CWP, non-shock
    • Maximum Temperature: 140°F

    Available Sizes:

    2", 2 1/2", 3", 4", 6", 8", 10", 12"
  • Watts Series 405NRSRW Flanged Gate ValvesWatts Series 405NRSRW Flanged Gate Valves

    Watts 405NRSRW

    CALL US 800-66-BKFLO
    Series 405NRSRW: Resilient wedge disc design offers positive seating and resistance against high differential pressure. Valve is best suited for service in either the fully open or closed position, but is also suitable as a throttling valve. Recommended for irrigation, potable water, water distribution service, feed lines, and sewage disposal facilities.

    Features:

    • ASTM A126 Class B Cast lron
    • Full port flow, low head loss
    • Fusion bonded coating, internal & external
    • Vulcanized, encapsulated resilient wedge
    • Easy in-line service
    • Replaceable disc
    • Boss-tapped and plugged
    • MSS-SP-70 conformance
    • 200psi CWP, non-shock
    • Maximum Temperature: 140°F

    Available Sizes:

    2", 2 1/2", 3", 4", 6", 8", 10", 12"
  • Matco Model 100W Cast Iron Gate ValveMatco Model 100W Cast Iron Gate Valve

    Matco 100W

    CALL US 800-66-BKFLO

    Features:

    • Resilient Wedge
    • Flanged Ends
    • Bolted Bonnet
    • Non Rising Stem
    • Bronze Stem
    • Class 125 Flanges
    • 200 PSI NON-SHOCK WOG
    • MAXIMUM TEMPERATURE 140°F

    Available Sizes:

    2", 2 1-2", 3", 4", 6", 8", 10", 12", 14", 16"
  • Matco Model 1ORW Cast Iron Gate ValveMatco Model 1ORW Cast Iron Gate Valve

    Matco 10RW

    CALL US 800-66-BKFLO

    Features:

    • Flanged Ends
    • Resilient Wedge
    • Epoxy Coating - Internal & External
    • Stainless Steel Stem Ball
    • 200 PSI NON-SHOCK WOG
    • MAXIMUM TEMPERATURE 140°F

    Available Sizes:

    2", 2 1-2", 3", 4", 5", 6", 8", 10", 12"
  • Cla-Val Model 100-01 Hytrol Basic ValveCla-Val Model 100-01 Hytrol Basic Valve Cover

    Cla Val Model 100-01

    CALL US 800-66-BKFLO

    The Cla-Val Model 100-01 Hytrol Valve is a hydraulically operated, diaphragm actuated, globe or angle pattern valve. It consists of three major components: body,diaphragm assembly, and cover. The diaphragm assembly is the only moving part.

    The diaphragm assembly is guided top and bottom by a precision machined stem. It utilizes a nonwicking diaphragm of nylon fabric bonded with synthetic rubber. A resilient synthetic rubber disc retained on three and one half sides by a disc retainer forms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm. The Model 100-01 is the basic valve used in nearly all Cla-Val Automatic Control Valves. It is the valve of choice for system applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control or check valve operation. The rugged simplicity of design and packless construction assure a long life of dependable, trouble-free operation. It is available in various materials and in a full range of sizes, with either screwed or flanged ends. Its applications are unlimited.

    Features:

    • Drip - Tight, Positive Seating
    • Service Without Removal From Line
    • Screwed or Flanged Ends
    • Globe or Angle Pattern
    • Every Valve Factory-Tested

    Available Sizes:

    3/8", 1/2"-3/4", 1", 1 1/2"- 1 1/4", 2", 2 1/2", 3", 4", 6", 8", 10", 12", 14", 16", 24"

Contact Us

  • Main Office: 3940 Home Ave
    San Diego, Ca 92105-5909
    Phone: 619-527-2525
    Toll free: 800-662-5356
    Fax: 619-527-2527
    Email: info@americanbackflow.com

  • This field is for validation purposes and should be left unchanged.